 | | Dan Ward; Nicholas Eveleigh/Maria Toutoudaki/Getty Images |
|
Pharmaceutical Technology’s annual equipment and manufacturing survey collected industry feedback on trends and the utility of equipment used in finished drug-product manufacturing. Respondents to both solid-dosage and parenteral drug manufacturing questions indicated overall satisfaction with existing equipment and equipment innovation. Data indicated that process analytical technology (PAT) is growing in use, but some users also noted a need for improvement in existing PAT equipment and in new solutions. A majority of respondents continue to view quality-by-design (QbD) principles as important, and more than 90% of respondents have a positive view of metrics and trend analysis. Responses also indicated further growth in continuous manufacturing and in manufacturing of highly potent drugs. Other areas of innovation to watch include robotics and software.
Solid-dosage equipment
Existing solid-dosage equipment is generally meeting industry needs. Only one area—PAT/in-process testing—was indicated as poor or inadequate by more than one-third of respondents (see Figure 1). Nearly one quarter of respondents also indicated that innovation is lacking in this area. This dissatisfaction is up from 2013, in which 22% indicated existing equipment was poor or inadequate and 16% said innovation was poor (1). It is interesting to note that use of PAT also increased over the past year among those surveyed. Process control/automation and powder transfer/materials handling were also flagged as needing significant improvement in existing equipment (25% and 21% respectively) and in innovation (17% and 12%); these areas were also noted in 2013.
Continuous manufacturing
The percentage of respondents involved in solid-dosage manufacturing that use continuous processes either overall or in select unit operations was nearly 40%, which was similar to 2013. Respondents expressed greater confidence in the evolution of continuous solid-dosage manufacturing, with nearly 85% predicting that the technology would evolve to allow fully continuous processing; in 2013, only 67% predicted such development of the technology. Just over one-third of respondents, however, predicted that the industry would only apply continuous processing to select operations even if fully continuous processes are available. Several individuals commented that, although continuous processing would work for high volumes, they didn’t see it being appropriate for small batch sizes. Half the respondents noted cost as a barrier to implementing continuous manufacturing, and over 40% also identified lack of expertise and insufficient PAT as barriers.
Parenteral equipment
The majority of parenteral-equipment respondents indicated that existing equipment is good or excellent, as shown inFigure 2. These respondents also agreed that innovation is generally keeping pace with most, if not all, of their needs. Innovation was rated as excellent or good in lyophilization (95%), barrier isolation (91%), disposables (91%), vial and cartridge fill-finish equipment (92%), and prefilled-syringe fill-finish equipment (85%). Process control and automation was a weaker area, similar to 2013, with approximately 25% saying that existing equipment is either poor or inadequate, and 18% saying that innovation is poor.
High-potency and high-containment
Just over one-third of respondents (in either solid-dosage or parenteral manufacturing) are involved with high-containment or high-potency manufacturing either in-house or at outsourced facilities. This percentage was up just slightly from last year’s survey; however, in 2014, 78% indicated an increase in their company’s level of activity over the past year up from 53% in 2013. When asked to identify the most challenging equipment or processing area, respondents’ answers were diverse, with 21% each indicating system setup/changeover and getting materials into or out of the system during production. Other areas chosen as the biggest challenge included containment (17%), ergonomics (14%), air flow (10%), environmental issues (9%), and personnel protection (7%). Training and cleaning validation were also identified as challenges.
 | | Figure 1: Utility of existing solid-dosage equipment. |
|
Equipment metrics
Those surveyed overwhelmingly agreed that metrics and trend analysis enhance the ability to improve equipment operation (92% of respondents). Actual use of metrics lagged this response somewhat. Approximately 75% stated that they use trend analysis to measure process or product deviations and relate this to equipment performance; 73% report that their company culture encourages optimizing manufacturing quality using metrics and trend analysis. Approximately 66% of respondents said their company has a metric(s) specifically to measure unplanned downtime of equipment (i.e., equipment failure).
 | | Figure 2: Utility of existing parenteral equipment. |
|
Nenhum comentário:
Postar um comentário